- 26 Oct 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
Demon Eye
- Updated on 26 Oct 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
Warranty Details
1-year warranty.
Product Insights
Our product is designed to fit perfectly into projector headlights, ensuring a seamless integration into your vehicle's lighting system.
Fitting Your Product
Here are installation guides for specific models:
1335-332 (15-17 Mustang S550 Demon Eye):
Begin by removing the projector. You'll find 4 Philips screws securing it.
Next, install the strip around the perimeter of the lens.
Ensure you route the cables in a way that doesn't obstruct any light.
Finally, test the lights to make sure they're working as expected.
4511-334 ORACLE "DEMON EYE" COLORSHIFT PROJECTOR ILLUMINATION KIT (Jeep Wrangler JL): For this product, please refer to the specific installation instructions provided in the kit. Proper installation will ensure the best results.
Wiring Guidelines
For 8559-333, the Demon Eye kit must be wired to a Color Shift Controller (not included). Here's what you need to do:
Cut the pins that come with the kit to expose the 4 colored wires.
Follow the provided wiring instructions to correctly connect the Demon Eye kit to the ColorShift Controller.
Troubleshooting Guidance
If you experience any issues with your product, we're here to help. You can try the following steps:
Swap drivers to see if this resolves the problem.
Test the product directly off the battery to ensure it's functioning correctly.