Troubleshooting - Heated Lens 5839-111

The heated feature of your Oculus headlight is powered on when the shared DRL Halo. (Ignition)

• You'll notice an amber indicator light on the headlight that lets you know the heating element is working. After 1 minute, it will turn off due to temperature regulation. The light and the heating element will turn back on when it senses the temperature goes below freezing; this is automatic.

You've reported burn marks/melting:

• Unfortunately, there's no troubleshooting that can be done. Please contact customer service.

You've mentioned that the heating element is not turning on, but the halo is:

• Unfortunately, there's no troubleshooting that can be done. Please contact customer service.

Note on Updated Kits with External Temperature Sensor:

• In the updated kits, we've included an external temperature sensor. The most ideal spot to mount this would be somewhere on your grill, but we understand that some customers may prefer it not to be visible. Ideally, this should be mounted in a spot where there is the least amount of engine heat.

Labeling Error on Some Lamps:

• You might find that some lamps arrive with a label on the DRL cable that says "Turn Signal." This was a labeling error. It is, in fact, the halo/DRL power cable.